PRODUCTS > Chains > US Type NACM 2010 Machine Twist Link chain

US Type NACM 2010 Machine Twist Link chain

Product Description

Twist Link Machine Chain, Zinc Plated

 

Machine Chain is twisted from the straight link and is popular in uses for tailgates, windmills, guard rails and maybe a long decoritive key chain, especially useful for applications requiring good relative strength and flexibility. It comes in a bright zinc finish.

 

Product Features:

  • Uses: General Utility Applications.

  • Standard Material: Low Carbon Steel.

  • Standard Finish: Brass and Zinc Plated.

  • Design Factor: 4 to 1.

 

Specification:

SIZEMATERIAL DIAMETERWORKING LOAD(MAX)BREAKING FORCE(MIN)NOMINAL INSIDE LENGTHNOMINAL INSIDE WIDTH
MMNO.MMINKGLBSKNLBSKNLBSMMIN
3430.12881953.4778027.61.094.560.18
3.433.40.1351092404.3197028.91.145.320.21
3.823.80.1481342955.25118029.11.155.580.22
4.114.10.1621593506.24140530.91.226.340.25
4.51/04.50.1771884157.43167030.91.226.850.27
4.92/04.90.1922254958.78197531.41.247.360.29
5.33/05.30.20726157510.23230031.91.268.120.32
5.54/05.50.21828863511.322545341.348.320.33
6.45/06.40.2537983514.86334537.31.479.650.38


Caution: 

Do Not Use for Overhead Lifting.
DO NOT EXCEED THE WORKING LOAD LIMIT.

 

WORKING LOAD LIMIT designates the maximum stress in pounds which should ever be applied to chain. This refers also to chain in the best condition, when new, and when the load is applied uniformly to a straight, untwisted length of chain. WARNING: WORK LOAD LIMIT MUST NOT BE EXCEEDED

 

BREAK TEST LOAD is the minimum load in pounds at which new chain has been found by experience to break, under tests in which the load is applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine.


Name*
Phone*
Email*
Leaving Message*
 
Verification code
Submit