PRODUCTS > Chains > US Type NACM 2010 Machine Straight Link Chain

US Type NACM 2010 Machine Straight Link Chain

Product Description

Straight Link Machine Chain, Zinc Plated

 

Machine Chain is a low carbon steel, electronically welded chain that is not heat-treated. It has shorter links that make it very flexible and particularly well suited for agricultural applications, guard rails, tailgate chains, door chain and playground equipment.
Warning: Do not use for overhead lifting and never exceed the working load limit.

 

Product Features:

  • Standard Material: Low carbon steel.

  • Standard Finish: Zinc plated.

  • Design Factor: 4 to 1.

  • Meet NACM 1010 and ASTM A413097 Standard.

 

Specification:

SIZEMATERIAL DIAMETERWORKING LOAD(MAX)PROOF TEST(MIN)BREAKING FORCE(MIN)NOMINAL INSIDE LENGTHNOMINAL INSIDE WIDTH
MMNOMMINKGLBKNLBKNLBMMINMMIN
3430.12982151.914303.82860140.555.30.21
3.433.40.1351222702.45404.81080150.596.10.24
3.823.80.1481473252.896505.78130015.50.616.60.26
4.114.10.1621773903.477806.931560160.637.10.28
4.51/04.50.1772114654.149308.27186018.80.747.90.31
4.92/04.90.1922475454.8510909.69218019.80.788.60.34
5.33/05.30.2072886355.65127011.29254021.60.859.10.36
5.54/05.50.2183187006.23140012.44280025.10.999.60.38
6.45/06.40.254209258.23185016.44370027.21.0711.20.44

 

 Caution: 

Do Not Use for Overhead Lifting. DO NOT EXCEED THE WORKING LOAD LIMIT.

 

WORKING LOAD LIMIT designates the maximum stress in pounds which should ever be applied to chain. This refers also to chain in the best condition, when new, and when the load is applied uniformly to a straight, untwisted length of chain. WARNING: WORK LOAD LIMIT MUST NOT BE EXCEEDED

 

BREAK TEST LOAD is the minimum load in pounds at which new chain has been found by experience to break, under tests in which the load is applied in direct tension to a straight length of chain with a uniform rate of speed on a standard chain testing machine.



Name*
Phone*
Email*
Leaving Message*
 
Verification code
Submit