Rigging Hardware Manufacturer for Safe Lifting, Securing and Load Handling
Powerful Machinery manufactures and supplies load-rated rigging hardware for demanding lifting and securing applications. Build your complete assembly from shackles, hooks, master links, turnbuckles, wire rope fittings, swivels, eye bolts, hoist rings, blocks and custom hardware—supported by material traceability, batch testing and export-ready documentation.
Built with defined load ratings and safety factors to support lifts with confidence and control.
Produced to meet Grade 80, Grade 100, and industry standards for consistent jobsite acceptance.
Each product supports traceability and compliance to reduce risk and simplify inspections.
Factory-controlled output supports bulk orders, stable lead times, and predictable pricing.
Powerful Machinery - Your Reliable Rigging Hardware Manufacturer
Types of Rigging Hardware
Shackles
Our shackle range covers bow shackles, dee/chain shackles, screw pin shackles, bolt type shackles, round pin shackles, long-reach shackles and stainless steel shackles. Select screw pin designs for frequent connection changes and bolt-type designs where pin rotation is a risk or a more permanent connection is required.
Hooks
Choose clevis hooks, eye hooks, grab hooks, slip hooks, swivel hooks or self-locking hooks according to the sling type, load shape and safety requirement. For chain sling systems, match the hook grade and chain size so the assembly WLL is controlled by the weakest rated component.
Turnbuckles
Turnbuckles and rigging screws provide controlled tension adjustment for cable, wire rope, rods and lashing systems. Available end fittings include jaw-jaw, eye-eye, hook-hook, jaw-eye and swage configurations, with galvanized and stainless steel options for outdoor and marine environments.
Wire Rope Fittings
Wire rope clips, thimbles, sleeves, sockets and swivels help terminate, protect and control wire rope assemblies. Use forged clips for critical applications, protect rope eyes with thimbles, and confirm clip quantity, spacing and torque from the manufacturer’s chart before use.
Rigging Hardware by Material and Finish
Material selection controls strength, corrosion resistance, operating environment and cost.
Carbon Steel
Alloy Steel
Stainless Steel 304
Stainless Steel 316
Hot-Dip Galvanized
Electro-Galvanized / Zinc Plated
Rigging Hardware by Grade
Grade 70
Typically used for transport tie-down and load securement; not the default choice for overhead lifting.
Grade 80
Common alloy chain grade for overhead lifting components and chain sling systems.
Grade 100
Higher WLL than traditional G80 components of similar size in many product families; useful for reduced weight and compact assemblies.
Custom Rigging Hardware and OEM /ODM Manufacturing
We Offer drawing-based manufacturing, special dimensions, materials, finish, private label packaging and project-based sourcing.
RIGGING HARDWARE GUIDE
Rigging hardware selection impacts safety and efficiency. Explore our guide to understand where each hardware type works best.
Rigging Hardware FAQs
What is Rigging Hardware
Rigging hardware is the group of load-rated components used to connect, tension, terminate, rotate, lift or secure loads in a rigging system. Common examples include shackles, hooks, master links, turnbuckles, wire rope clips, thimbles, swivels, eye bolts, hoist rings and blocks.
What are the main types of rigging hardware?
The main types of rigging hardware include shackles, hooks, links/rings, turnbuckles, wire rope clips, thimbles, sockets, swivels, hoist rings, eye bolts, rigging blocks and load binders. A strong hub should group these by product function and then by material, grade, application and standard.
Which rigging hardware is designed for vertical pulls?
Many lifting points such as shoulder eye bolts, hoist rings, shackles and hooks may be used in vertical pulling applications when their WLL, pull angle and manufacturer instructions match the lift. Unshouldered eye bolts are generally limited to straight vertical loading; always confirm the product chart.
How often should rigging hardware be inspected?
Rigging Hardware Inspection frequency depends on the hardware type, severity of service, frequency of use and local rules. For regulated use, OSHA requires slings and attachments to be inspected by a competent person before each day of use, with additional inspections during use when conditions warrant.
When should rigging hardware be removed from service?
Remove hardware from service when it shows cracks, deformation, severe wear, corrosion, damaged threads, missing latches, illegible markings, unauthorized repair, heat damage or any condition judged unsafe by a qualified person. For chain slings, OSHA includes wear limits and removal requirements.
What does ASME B30.26 cover?
ASME B30.26 covers detachable rigging hardware used for load handling, including shackles, links, rings, swivels, turnbuckles, eyebolts, hoist rings, wire rope clips, wedge sockets, rigging blocks and load indication devices.
What is the difference between stainless steel and galvanized rigging hardware?
Stainless steel, especially 316, is selected for corrosion resistance in marine and washdown environments. Galvanized carbon steel is often more economical and provides zinc coating protection for outdoor industrial use. The right choice depends on corrosion exposure, WLL, certification and budget.
Can I use marine rigging hardware for lifting?
Only use marine hardware for lifting when it is specifically load-rated, marked and documented for lifting. Some marine or architectural stainless hardware is designed for tensioning or securing rather than overhead lifting.
What information is needed for a rigging hardware quote?
Send the product type, WLL or size, material, grade, finish, standard, quantity, destination port and certificate requirement. Drawings or photos are helpful for custom hardware.
Do you provide custom rigging hardware?
Yes. The hub should position Powerful Machinery for OEM/ODM manufacturing, drawing-based production, special dimensions, private labeling, packing requirements and project-specific certificate packages.
Have More Questions?
By understanding the specific uses of each type of rigging hardware and their compatibility with various lifting equipment, you can make informed decisions and choose the right components for your lifting needs. For more information or help selecting hardware, please contact us today.