Powerful Machinery supplies wire rope clips, also called wire rope clamps, for distributors, rigging suppliers and industrial buyers. Browse malleable and forged models in DIN, U.S. and Italy type patterns, then send the rope diameter, product type, size and order quantity for a quotation. Use the model pages below for dimensions; the catalogue lists sizes by specific design rather than one universal clip size range.
Choose by the specified clip pattern and construction. The ranges below are the sizes shown in the Powerful Machinery catalogue; confirm the required dimensions on the individual product page or against your drawing. The listed size identifies the clip dimensions; suitability for a termination also depends on the clip design, wire rope and installation requirements.
| Catalogue Model | Listed Size Range | Construction |
|---|---|---|
| DIN 13411-5 type malleable | 5–40 mm | Malleable |
| DIN 741 type malleable | 3–40 mm | Malleable |
| DIN 1142 type malleable | 5–40 mm | Malleable |
| U.S. Type G-450 drop forged | 1/8–3 1/2 in. | Forged |
| Italy type forged | 3–4 mm, then 5–45 mm | Forged |
| Type A malleable | 6–50 mm | Malleable |
| Type B malleable | 1/8–1 in. | Malleable |
| U.S. type malleable | 1/8–1 in. | Malleable |
Send the catalogue model or drawing, wire rope diameter, required size and dimensions, material or construction, finish, quantity per size, packaging requirements and destination market. State whether the termination is part of a lifting or other regulated assembly and list any required installation or inspection documents. Powerful Machinery can review the supplied specification and quote the identified product; availability, documentation and any nonstandard requirements should be confirmed for the order.
The DIN 741 catalogue item above is malleable. A separate stainless steel DIN 741 clip appears in the stainless steel product range; its material and size chart should be reviewed independently.
For assembly instructions, read the wire rope clip installation guide. If the specification includes an eye termination, review wire rope thimbles alongside the rope and clip requirements. These resources support product selection; follow the instructions applicable to the actual rope and hardware supplied.
Both names are commonly used for this product family. Specify the exact DIN, U.S. or Italy type model when requesting a price; the names alone do not identify the size, construction or intended application.
Start with the wire rope diameter and required clip design, then check the corresponding catalogue dimensions. Clips with the same nominal rope size may have different dimensions depending on the model.
Provide the clip type or catalogue model, wire rope diameter, required size, material or construction, finish and quantity. Include any drawing, packaging, marking or documentation requirements that apply to the order.
After downloading the product catalogue, our dedicated technical experts will provide you with one-on-one service.
