HSZ-C TYPE CHAIN BLOCK OVERVIEW
Pulling the hand chain operates the hoist mechanism and moves the load chain to raise or lower the load. The load brake holds the load when the operator stops pulling the hand chain.
Model selection must consider the complete lifting arrangement. Rated capacity alone does not confirm that the hoist will fit the available space, provide sufficient lift, match the suspension arrangement, or suit the service conditions.
HSZ-C TYPE CHAIN BLOCK SPECIFICATIONS
Use the HSZ-C specification table and dimensional drawing to compare rated capacity, standard lift, test load, minimum hook distance, hand-chain pull, number of load-chain falls, load-chain diameter, net weight, and packing dimensions.
| Model | HSZ-C1/2 | HSZ-CL1 | HSZ-C112 | HSZ-C2 | HSZ-C3 | HSZ-C5 | HSZ-C10 |
| Capacity(l) | 0.5 | 1 | 1.5 | 2 | 3 | 5 | 10 |
| Standard lift(m) | 2.5 | 2.5 | 2.5 | 3 | 3 | 3 | 3.5 |
| Test load(l) | 0.75 | 1.5 | 2.25 | 3 | 4.5 | 7.5 | 15 |
| Min.distance between hooks(mm) | 285 | 315 | 340 | 380 | 475 | 600 | 700 |
| Chainpull to lift full load(n) | 25 | 33 | 34 | 34 | 35 | 39 | 41 |
| No. of load chain fall lines | 1 | 1 | 1 | 2 | 2 | 2 | 4 |
| Diameter of load chain(mm) | 6 | 6 | 8 | 8 | 8 | 10 | 10 |
| Net weight(kg) | 8 | 10 | 11 | 14 | 22 | 36 | 68 |
| Gross Weight(kg) | 9.4 | 11.5 | 12 | 17 | 26 | 43 | 82 |
| (Packing measurement L×W×H(cm)) | 28×21×17 | 30×24×18 | 34×29×20 | 35×25×19 | 38×30×20 | 45×35×24 | 70×46×75 |
The HSZ-C series is intended for applications that match the specifications and operating conditions shown above. For other designs or general selection guidance, compare our complete chain block range.
HOW TO SELECT AN HSZ-C CHAIN BLOCK
TYPICAL APPLICATIONS
After the model, suspension arrangement, and operating environment have been confirmed, an HSZ-C chain block may be considered for controlled vertical lifting in workshops, warehouses, maintenance areas, construction support work, and machinery installation.
If the task requires pulling, tensioning, or a lever-operated device, compare the selection principles in our lever hoist vs chain block guide.
INSPECTION AND OPERATING LIMITS
STORAGE BETWEEN USES
INFORMATION TO INCLUDE IN YOUR ENQUIRY
FAQ
What Is an HSZ-C Type Chain Block?
The HSZ-C Type Chain Block is a manually operated chain hoist intended for controlled vertical lifting. The operator pulls the hand chain to operate the lifting mechanism and move the load chain.
What Is the Difference Between HSZ-C and HSZ-A?
Treat HSZ-C and HSZ-A as separate model families. Compare only approved specifications, dimensional drawings, construction details, and documentation for each series. Do not assume that parts, rated capacities, dimensions, or other technical characteristics are interchangeable.
Which HSZ-C Rated Capacity Should I Select?
Select a rated capacity that meets or exceeds the maximum verified lifted load, including any below-the-hook attachments. Then confirm the required lift, available headroom, number of load-chain falls, hand-chain operating effort, suspension arrangement, and service environment.
How Often Should an HSZ-C Chain Block Be Inspected?
Inspect the chain block before use and at the periodic inspection frequency required by service conditions, the supplied manual, site procedures, and applicable regulations. Severe or frequent service may require shorter inspection intervals.